VANCOUVER, British Columbia, July 27, 2023 (GLOBE NEWSWIRE) -- Marimaca Copper Corp. (“Marimaca Copper” or the “Company”) (TSX: MARI) is pleased to announce the results of the five drill hole diamond drilling exploration program from the eastern margin of the Marimaca Oxide Deposit (“MOD”). The program was designed to follow-up on the sulphide-bearing intersection of the previously released hole MAD-22, which intersected higher grades of primary copper mineralization down-dip of the Marimaca oxides. The program encountered challenging drilling conditions due to the orientation of the drilling from existing drill-pads along major known structures at the MOD. Results from this program and learnings regarding the approach for potential future deeper drilling, particularly origin and orientation, and will be considered for the design of follow-up exploration work. A discussion of results is provided in the “Geological Discussion” section of this news release.
Highlights
Sergio Rivera, VP Exploration of Marimaca Copper, commented:
“Despite challenging drilling conditions we continue to improve our understanding of Marimaca’s genesis and target generation for the potential sulphide feeder zones. We are very encouraged to see the continuation of the alteration assemblages and rock types observed in MAD-22 in the follow-up program, which is the first time that consistent sulphide-associated alteration has been observed below the MOD. MAD-25, in particular, which stepped out 500m to the south of MAD-22, intersected the expected alteration mineral assemblages with strong mineralization at the targeted horizon, but was terminated before the expected higher-grade zone due to the intersection of a fault zone, which deviated the hole.
Planning for the next phase of sulphide exploration will incorporate learnings from this first phase campaign, including adjusting the approach to drilling from east to west to allow for easier orientation of the drilling to the deeper target horizons. Approaching from the west will take time to plan new drilling infrastructure rather than using existing eastern drill pads at the MOD, however we believe the sulphide potential warrants this.
We continue to believe that the sulphide potential is high, particularly considering the scale of the oxidized mineralized body at the MOD and the indications, such as Hole MAD-22, that higher grade remnant feeder structures, remain intact in the shallower down-dip zones of the MOD.”
Figure 1: Plan view of drill holes
Figure 2: Idealized 3D view of MOD (looking North) with interpreted sulphide feeder horizon and 2023 MRE pit
Figure 3: Idealized long and cross 3D view of MOD with MAD-22 interpreted Chalcopyrite-dominated zones identified
Further Drill Hole Observations
Geological Discussion
Results from MAD-22 and follow up sulphide exploration drilling continue to support the current interpretation of the mineralized system at the MOD. The large-scale nature of the supergene (oxide) mineralized body at the MOD, and the alteration assemblages and remnant primary sulphide-bearing structures encountered in MAD-22, 25, 26 and 27 continue to provide strong evidence for a sulphide-rich ‘feeder’ system which can be interpreted as the source for Marimaca’s oxide ore body. Chalcopyrite and pyrite-bearing mineralization encountered in drilling post-dates pervasive magnetite-actinolite alternation which is consistently found down-dip of the MOD and corresponds to the magnetic-highs identified in the high-resolution mag-drone surveys (see press release dated February 15, 2023).
The program’s goal of stepping out from MAD-22 was hindered by the drilling orientation which was east-biased, causing interference from parallel dykes and late faults on north-south trends and dipping to the east. Planning for future potential deep sulphide drilling will focus on a western orientation which will require preparation of new drilling infrastructure rather than use of existing access roads and MOD drill pads. Despite the challenging conditions, the results from MAD-24, 25, 26 and 27 further confirm the IOCG-nature of the broader Marimaca mineralizing system which is hosted by a monzodiorite stock affected by a system of parallel faults and fractures which control the emplacement of superimposed mineralization-alteration events.
Borehole Teleview analysis of holes MAD-24, 25, 26 and 27 returned similar results to that of MAD-22 in that that the dominant structures controlling in the altered and higher-grade primary mineralization are oriented north-north-east dipping at 75 to 80 degrees to the east. This is in contrast to the general structural sense of the MOD, where dominant structures are oriented more north south and are more shallow dipping to the east. The importance of dacitic dykes and the north-west trending regional faults and structures is also noted for the confluence of these important geological features and their proximity to higher grade mineralization, both in the oxide and primary mineral zones.
The explored area for Marimaca sulphides remains very limited and relatively shallow (<450m depth), with the deeper extents of the Marimaca system remaining untested and the oxide/secondary sulphide column consistently reaching depths of 400m+. As previously noted, the size of the surface expression and volumetric scale of the MOD continue to support the thesis that the genesis of the Marimaca oxides must relate to a strong, successive tectonic-magmatic event which introduced copper-sulphide bearing structures that underwent repetitive oxidation events above depths of 500m.
Background – Marimaca Sulphide Exploration
Based on previous drilling and results from hole MAD-22, the Company developed an exploration model which was based on a strong correlation between higher grade chalcopyrite mineralization and high magnetic susceptibility, which was used to vector for future deeper drilling campaigns. During the 2021 campaign, the deeper drilling, which was targeting deeper sulphide potential, encountered additional oxide and secondary sulphides in a zone now known as MAMIX (refer to announcement dated 5 May 2021). This extended the envelope of leachable copper minerals by, in some cases, several hundred meters. This discovery was a core component of the upgraded Mineral Resource Estimate (“MRE”) released in October 2022 (refer to announcement dated 13 October 2022), but left the sulphide potential unaddressed.
A review of historical drilling data highlighted numerous broad zones of, typically remnant, primary mineralization, especially around the centre of the project, which were identified but never properly followed up on due the focus on the MAMIX Zone. MAD-22 (a geotechnical hole testing rock quality on the eastern MOD pit wall) was drilled on section N7,435,550, which is located 250m to the south of N7,435,800 (Figure 1) and intersected very high-grade primary copper mineralization. MAD-22 was drilled directly into an area with some of the highest magnetic susceptibilities encountered at the project. As noted in the release in December 2022, MAD-22 encountered very high grades of primary copper mineralization over broad downhole widths and encountered mineral textures of magnetite-actinolite veins and stringers and massive chalcopyrite.
Table 1. Summary of Significant Intercepts
Hole | Depth (m) | From (m) | To (m) | Intercept (m) | %CuT | |
MAD-23 | No Recovery | |||||
MAD-24 | 336 | 0 | 152 | 152 | 0.31 | |
including | 24 | 122 | 98 | 0.43 | ||
including | 24 | 98 | 74 | 0.52 | ||
including | 24 | 42 | 18 | 0.68 | ||
and | 64 | 92 | 28 | 0.79 | ||
MAD-25 | 217.65 | 136 | 192 | 56 | 0.40 | |
including | 164 | 188 | 24 | 0.63 | ||
MAD-26 | 348.9 | 154 | 268 | 114 | 0.19 | |
including | 186 | 268 | 82 | 0.22 | ||
including | 190 | 230 | 40 | 0.31 | ||
including | 190 | 204 | 14 | 0.49 | ||
and | 212 | 230 | 18 | 0.28 | ||
and | 250 | 262 | 12 | 0.30 | ||
MAD-27 | 317.45 | 68 | 232 | 164 | 0.28 | |
including | 162 | 232 | 70 | 0.32 | ||
including | 68 | 108 | 40 | 0.50 | ||
including | 74 | 92 | 18 | 0.90 | ||
and | 162 | 174 | 12 | 1.01 | ||
and | 192 | 206 | 14 | 0.33 | ||
and | 220 | 232 | 12 | 0.38 |
Table 2. Drill Collars and Survey
Hole | Easting | Northing | Elevation | Azimuth | Inclination | Depth (m) |
MAD-23 | - | - | - | - | - | No Recovery |
MAD-24 | 375143.6 | 7435535.1 | 1125.0 | 90 | -65 | 336.00 |
MAD-25 | 375204.2 | 7435426.3 | 1108.3 | 90 | -65 | 217.65 |
MAD-26 | 375202.7 | 7435431.3 | 1108.1 | 40 | -60 | 348.90 |
MAD-27 | 375143.5 | 7435537.1 | 1125.0 | 70 | -55 | 317.45 |
Sampling and Assay Protocol
True widths cannot be determined with the information available at this time. DDH holes were sampled on a 2m continuous basis, halved by a conventional core splitter on site with one half sent to the Andes Analytical Assay preparation laboratory in Calama and the pulps then sent to the same company laboratory in Santiago for assaying. Samples were prepared using the following standard protocol: drying; crushing all sample to -1/4” and passing through a secondary crusher to better than 80% passing -10#; homogenizing; splitting; pulverizing a 400-600g subsample to 95% passing -150#; and a 125g split of this sent for assaying. All samples were assayed for %CuT (total copper); %CuS (acid soluble copper) and Ag AAS. Au was Fire Assayed. A full QA/QC program, involving insertion of appropriate blanks, standards and duplicates was employed with acceptable results. Pulps and sample rejects are stored by Marimaca Copper for future reference.
Qualified Person
The technical information in this news release, including the information that relates to geology, drilling and mineralization was prepared under the supervision of, or has been reviewed by Sergio Rivera, VP of Exploration, Marimaca Copper Corp, a geologist with more than 35 years of experience and a registered member of the Comision Minera (Chilean Mining Commission), as well a member of the Colegio de Geólogos de Chile, Instituto de Ingenieros de Minas de Chile and of the Society of Economic Geologist USA, and who is the Qualified Person for the purposes of NI 43-101 responsible for the design and execution of the drilling program.
The QP confirms he has visited the project area, has reviewed relevant project information, is responsible for the information contained in this news release, and consents to its publication.
Contact Information
For further information please visit www.marimaca.com or contact:
Tavistock
+44 (0) 207 920 3150
Emily Moss / Adam Baynes
[email protected]
Forward Looking Statements
This news release includes certain “forward-looking statements” under applicable Canadian securities legislation. There can be no assurance that such statements will prove to be accurate, and actual results and future events could differ materially from those anticipated in such statements. Forward-looking statements reflect the beliefs, opinions and projections on the date the statements are made and are based upon a number of assumptions and estimates that, while considered reasonable by Marimaca Copper, are inherently subject to significant business, economic, competitive, political and social uncertainties and contingencies. Many factors, both known and unknown, could cause actual results, performance or achievements to be materially different from the results, performance or achievements that are or may be expressed or implied by such forward-looking statements and the parties have made assumptions and estimates based on or related to many of these factors. Such factors include, without limitation: risks related to share price and market conditions, the inherent risks involved in the mining, exploration and development of mineral properties, the uncertainties involved in interpreting drilling results and other geological data, fluctuating metal prices, the possibility of project delays or cost overruns or unanticipated excessive operating costs and expenses, uncertainties related to the necessity of financing, uncertainties relating to regulatory procedure and timing for permitting reviews, the availability of and costs of financing needed in the future as well as those factors disclosed in the annual information form of the Company dated March 27, 2023 and other filings made by the Company with the Canadian securities regulatory authorities (which may be viewed at www.sedar.com). Readers should not place undue reliance on forward-looking statements. Marimaca Copper undertakes no obligation to update publicly or otherwise revise any forward-looking statements contained herein whether as a result of new information or future events or otherwise, except as may be required by law.
Neither the TSX nor the Canadian Investment Regulatory Organization accepts responsibility for the adequacy or accuracy of this release.
Figures accompanying this announcement are available at
https://www.globenewswire.com/NewsRoom/AttachmentNg/37cf26ca-9ff4-4fb8-ac58-a3fa6b11b774
https://www.globenewswire.com/NewsRoom/AttachmentNg/e3db89f4-a47f-48f3-a849-4e0ff0e84f01
https://www.globenewswire.com/NewsRoom/AttachmentNg/27034ebe-6a79-430b-b653-6af1c0c85b04