VANCOUVER, British Columbia, Oct. 14, 2021 (GLOBE NEWSWIRE) -- Gold Bull Resources Corp. (TSX-V: GBRC) (“Gold Bull” or the “Company”) is pleased to report its initial Abel Knoll Bottle Roll Leach Test work conducted in September 2021 at its 100% owned Sandman Project (“Sandman” or the “Project”) located in Humboldt County, Nevada, USA.
HIGHLIGHTS & UPDATE:
Gold Bull CEO, Cherie Leeden commented:
An average of 88% gold recovering from Abel Knoll without doing any metallurgical optimization work is exceptional. We focussed our study on Abel Knoll because there had not been previous metallurgical work done on that deposit yet we had some impressive drill hits at Abel Knoll this year. These excellent metallurgical gold recoveries are very similar to the historical metallurgical recovery data we inherited for our other three deposits (North Hill, Silica Ridge and South-East Pediment). Additional optimization metallurgical work is planned for next year, that will feed into a feasibility study.
Background
Bottle Roll Leach Test work results
Gold Bull submitted 24 samples to Kappes, Cassiday & Associates (KCA) metallurgy laboratory in Reno, Nevada in September 2021 to provide preliminary test work of gold recovery for the Abel Knoll deposit as no prior metallurgical work had been completed at this ore deposit. The oxide sample results are very encouraging with an average of 88% gold extracted and maximum recovery 97% from the oxide sample material. These are preliminary test work results, and no optimisation work has been completed.
The gold recovery results are similar to Newmont’s prior test work completed at Southeast Pediment and Silica Ridge and Kennecott’s prior work at North Hill, Silica Ridge and Southeast Pediment.
The 24 samples were sourced from the Abel Knoll ore deposit and comprised composite reverse circulation samples sourced from a range of deposit depths, lithology and oxidation states. A wide range of mineralised samples were submitted to test the variation of the deposit results in oxide, transitional and sulfide ore horizons over varying depths. The sample material was utilized exclusively for Bottle Roll Leach Test work. The analysis including preparation, assaying and metallurgical studies utilizing accepted standard industry procedures and a specialist experienced metallurgical laboratory KCA.
The maximum percentage gold extracted was 97% gold with an average of 73% over all of the oxide, transitional and sulfide ore horizons. The results reflect with the presence of sulphide in sample materials which reduces leach recovery where the oxide and oxide transitional samples returned encouraging results >80% gold extracted and those from fresh rock with sulfide returned lower results as anticipated from this type of leach test work.
Figure 1. Map showing location of the mineral resources at Sandman.
Gold extraction for the nine oxide samples averaged 88% and ranged from 80% to 97% extracted gold. Gold extraction for the six samples listed as sulfide material averaged 64% with maximum 91%. Gold extraction for the nine samples comprising transitional oxide-sulfide material averaged 65%. These results collectively show a general trend transitioning from oxide to deeper fresh sample material which is considered normal for bottle roll leach test work. All three holes tested show a gradual decrease in leach gold extraction with depth as the material transitions from oxide to deeper sulfide ore. Oxide ore extends from surface to a depth of 201m (660 feet) in the western Abel Knoll diatreme breccia and ranges from 53m (175 feet) to 80m (265 feet) depth from surface in the eastern portion of the deposit.
A summary of GBRC’s bottle roll leach test work results are summarised in the table below.
Sandman Project - Abel Knoll
Summary of Cyanide Bottle Roll Leach Tests - Gold
The Abel Knoll deposit has low levels of silver and Gold Bull’s Bottle Roll Leach Test work returned an average of 24% extracted silver with maximum 63%. Those samples with higher silver extractions were sourced from the higher grade non oxide materials. These test results are indicative only and have not been optimised.
Sandman Project - Abel Knoll Ore Deposit
Summary of Cyanide Bottle Roll Leach Tests - Silver
The graph below shows the extracted gold within oxide material returning consistently higher gold recoveries (orange) compared to transitional material (light grey) and sulfide material (dark grey). The two samples returning >80% extracted gold from the sulfide material are likely to form part of the transitional material given this is a preliminary test to determine the range of leach recoveries for the Abel Knoll deposit.
Sandman Project - Abel Knoll Ore Deposit
Gold Extraction v’s oxide to fresh ore
The graph below shows the extracted gold over the depth of intermittent composite samples from surface in hole SA-001 and indicates the general tapering of extracted gold with depth from 70 to 210m (240 to 680 feet). The oxide boundary of the diatreme breccia in the west of the ore deposit is deep at 201m (660 feet) from surface and the eastern stratigraphic oxide boundary ranges from 53m (175 feet) to 80m (265 feet) depth from surface. The extracted gold oxide material test work results are very encouraging given the depth of the diatreme breccia at 201m (660 feet) is deep.
Bottle Roll Leach Test Work Process
The objective of the Bottle Roll Leach Test work was to test the variability of gold recovery on a range of ores, including variability of gold recovery from oxide to sulfide ores sourced from different depths of the Abel Knoll deposit. No prior test work has been conducted from the Abel Knoll deposit.
Sandman Project - Abel Knoll
Parameters of Bottle Roll Tests by KCA
Table 3. Parameters of Bottle Rolle tests completed by KCA for Gold Bull in September 2021
Summary of Sample Materials
Samples received by KCA for the cyanide Bottle Roll Leach Test work were sourced from Abel Knoll reverse circulation drilling chips from holes SA-0001, SA0031 and SA-0033. The table below provides a summary of materials selected for the test work. The average sample weight was 1,200 grams with minimum 1,119 grams and maximum 1,283 grams. Some variation of gold grades reported by AAL and KCA are evident of the coarse gold nugget effect at Abel Knoll which has previously been studied at Sandman.
Sandman Project - Abel Knoll Ore Deposit
Summary of Received Samples at KCA
HISTORICAL METALLURGICAL TEST RESULT SUMMARY: FOR SOUTHEAST PEDIMENT, SILICA RIDGE AND NORTH HILL
This section discusses the historical Bottle Roll Testwork at the Sandman deposit, all of the testwork was preliminary and has not been optimised. Most of the samples were taken from reverse circulation drill chips and drill core and early work from trenches.
The draft below provides the location of testwork relative to Sandman Mineral Resource Estimate (MRE) boundaries.
North Hill and Silica Ridge – Newmont’s Historical Test Results
Newmont conducted Bottle Roll Leach Test work at Southeast Pediment and Silica Ridge. Their preliminary test work was not optimised and concluded the following:
Southeast Pediment - Newmont’s Historical Test Results
Newmont’s test work material comprised 80% passing -200 mesh (0.074mm) with 24 hour leach returning an average of 85.75% extracted gold. Selected materials comprised majority oxide as well as transitional and sulfide ore to test the variability of results from the deposit, maximum recovery was 97% and minimum 75.79% demonstrating relatively consistent results over a range of variable oxidation materials. No flow sheet optimisation test work was conducted and these were preliminary tests from diamond core samples. Addition of the gravity concentration step improved recovery for samples >90% extracted gold. Results for Newmont’s Southeast Pediment Ore deposit preliminary variability test work are provided in the table below.
Newmont’s Historical Test Results
Southeast Pediment - initial bottle roll results
24 hr Leach, 80% passing 200 mesh
Hole# | Intervals | Ore Type | Sample ID | Avg. Au opt | 80% Grind/Leach | NaCN, lb/t | Lime, lb/t* |
NSM-00004 | 66.3-74.9 | Oxide | Comp 1 | 0.077 | 79.81 | 1.94 | 1.2 |
NSM-00004 | 80.2-89.0 | Oxide | Comp2 | 0.064 | 79 | 1.96 | 1.4 |
NSM-00004 | 104.4-114.5 | Oxide | Comp3 | 0.047 | 82.98 | 1.94 | 1.31 |
NSM-00004 | 124.0-129.5 | Oxide | Comp4 | 0.266 | 78.99 | 1.94 | 1.33 |
NSM-00007 | 113.6-118.3 | Oxide | Comp5 | 0.38 | 75.79 | 1.94 | 1.34 |
NSM-00010 | 97.1-102.5 | Trans | Comp6 | 0.054 | 85.18 | 1.95 | 1.46 |
NSM-00010 | 79.0-82.7 | Oxide | Comp7 | 0.085 | 88.29 | 1.94 | 1.38 |
NSM-00010 | 114.5-117.6 | Oxide | Comp8 | 0.123 | 86.16 | 1.95 | 1.09 |
NSM-00010 | 127.6-129.2 | Oxide | Comp9 | 0.137 | 88.66 | 1.94 | 0.97 |
NSM-00010 | 138.2-141.0 | Oxide | Comp 10 | 0.183 | 83.1 | 1.94 | 1.29 |
NSM-00010 | 512.4-519.9 | Sulf 1% | Comp 11 | 0.043 | 82.87 | 2.94 | 1.66 |
NSM-00009 | 89.0-93.3 | Oxide | Comp 12 | 0.179 | 89.4 | 1.96 | 1.29 |
NSM-00009 | 110.0-112.0 | Oxide | Comp 13 | 0.505 | 94.75 | 1.94 | 1.25 |
NSM-00009 | 123.0-128.2 | Sulf 2% | Comp 14 | 0.071 | 79.51 | 2.97 | 0.68 |
NSM-00024 | 113.2-127.4 | Ox Leach | Comp 15 | 0.037 | 85.22 | 1.94 | 1.5 |
NSM-00024 | 160.0-165.0 | Oxide | Comp 16 | 0.048 | 88.42 | 1.96 | 2.29 |
NSM-00031 | 82.5-102.9 | Ox Leach | Comp 17 | 0.062 | 93.51 | 1.96 | 2 |
NSM-00019 | 69.8-74.0 | Oxide | Comp18 | 0.03 | 74.74 | 1.94 | 1.55 |
NSM-00019 | 76.6-79.7 | Oxide | Comp19 | 0.738 | 95.94 | 1.95 | 1.5 |
154.3-164.0 | |||||||
NSM-00017 | 171.1-177.1 | Oxide | Dup #1 | 0.263 | 95.59 | 1.47 | 2.62 |
154.3-164.0 | |||||||
NSM-00017 | 171.1-177.1 | Oxide | Dup#2 | 0.251 | 94.67 | 1.65 | 2.5 |
NSM-00017 | 177.1-193.5 | Ox Leach | Col#1 | 0.011 | 71.98 | 1.05 | 1.08 |
NSM-00033, | 48.9-95.4, | ||||||
NSM-00015 | 179.9-205.5 | Ox Leach | Col#2 | 0.028 | 94.37 | 0.88 | 1.82 |
NSM-00017 | 69-85.4 | Oxide | Col#3 | 0.076 | 96.92 | 1.58 | 3.04 |
NSM-00026, | 203.3-224.5 | ||||||
NSM-00033, | 95.4-125.3 | ||||||
NSN-00015 | 149.0-179.9 | Ox Leach | Col#4 | 0.013 | 76.78 | 1.35 | 2.27 |
NSM-00033, | 48.9-95.4 | ||||||
NSM-00015, | 179.9-205.5 | ||||||
NSM-00026, | 203.3-224.5 | ||||||
NSM-00033, | 95.4-125.3 | ||||||
NSN-00015 | 149.0-179.9 | Ox Leach | Col#5 | 0.019 | 86.81 | 0.93 | 2 |
Average | 85.75 | 1.84 | 1.61 | ||||
* Caustic soda actual pH modifier, value is time equivalent |
Table 5. Summary of Newmont’s Southeast Pediment preliminary Bottle Roll Leach Test work sourced from Newmont’s historical files.
Cyanide and Lime consumptions were 1.84 lb/st and 1.61 lb/st, respectively.
Summary of Newmont’s variability test work for the Southeast Pediment Bottle Roll Test work is summarised below. The results indicate gravity concentration improved the extracted of gold from 85.9% to 92.53% and that Carbon in Leach (CIL) and additional cyanide did not yield significantly improve results.
Newmont’s Historical Test Results
Southeast Pediment - initial bottle roll results
Sample ID | 1.5 inch BR Leach* | 80% Grind/Leach | 80% Grind/Grav/Leach | 80% Grind/CIL Leach | 80% Grind/Grav/CIL Leach | 80% Grind/Leach @ high CN |
Comp1 | 81.69 | 79.81 | 96.77 | |||
Comp2 | 82.2 | 79 | 94.64 | |||
Comp3 | 92.03 | 82.98 | 97.38 | |||
Comp4 | 83.85 | 78.99 | 76.1 | |||
Comp5 | 69.69 | 75.79 | 96.7 | |||
Comp6 | 69.22 | 85.18 | 93.08 | |||
Comp7 | 82.76 | 88.29 | 79 | |||
Comps | 79.27 | 86.16 | 96.15 | |||
Comp9 | 78.53 | 88.66 | 84.08 | |||
Comp 10 | 72.49 | 83.1 | 97.22 | 82.36 | ||
Comp 11 | 29.17 | 82.87 | 97.22 | 89.4 | ||
Comp 12 | 71.36 | 89.4 | 96 | 94.75 | ||
Comp13 | 64.89 | 94.75 | 97.86 | |||
Comp 14 | 36.17 | 79.51 | 87.71 | |||
Comp15 | 56.07 | 85.22 | 86.25 | |||
Comp 16 | 25.15 | 88.42 | 90.72 | |||
Comp17 | 71.24 | 93.51 | 90.69 | |||
Comp18 | 71.6 | 74.74 | 96.7 | |||
Comp19 | 55.26 | 95.94 | 98.24 | |||
Dup#1 | 95.59 | 95.76 | 92.74 | 86.74 | 94.99 | |
Dup#2 | 94.67 | 94.92 | 93.73 | 91.46 | 94.96 | |
Col#1 | 71.98 | |||||
Col#2 | 94.37 | |||||
Col#3 | 96.92 | |||||
Col#4 | 76.78 | |||||
Col#5 | 86.81 | |||||
*Average, | ||||||
1/2" vs. 200 mesh | 66.98 | 84.86 | ||||
Avg without vs. with Grav | 85.84 | 92.53 | ||||
Avg without vs. with CIL | 89.13 | 90.6 | ||||
Avg with CIL w/wo Grav | 95.13 | 95.34 | 89.1 | |||
Average vs. elevated NaCN | 95.13 | 94.98 |
Table 6. Summary of Newmont’s Southeast Pediment preliminary Bottle Roll Leach Test including gravity, CIL and additional cyanide test work sourced from Newmont’s historical files.
Silica Ridge - Newmont’s Historical Test Results
Newmont’s test work for Silica Ridge was similar to the test work conducted at Southeast Pediment with materials tested for oxide, transitional and sulfide ores over a range of depths and selected geology to determine the range of results. Newmont’s tested material comprised 80% passing -200 mesh (0.074mm) with 24 hour leach yielding an average of 82.5% extracted gold for all materials analysed and maximum gold extracted 97.85%. The higher-grade recovery for Silica Ridge was improved compared to Southeast Pediment likely due to inclusion of lower grade material in the Southeast Pediment test work, Newmont found the best recoveries were achieved from the higher gold grade materials.
Newmont’s Historical Test Results
Silica Ridge - initial bottle roll results
24 hr Leach, 80% passing 200 mesh
Hole# | Intervals | Ore Type | Sample ID | Expected Avg. Au opt | Actual Avg. au opt | 80% 200# Grind/Leach | NaCN, lb/t | Lime, lb/t |
NSM-00042 | 123.3-133.8 | Oxide | Comp 1 | 8.019 | 0.218 | 93.54 | 1.15 | 1.24 |
NSM-00044 | 95.0-99.1, 121.6-127.6, 139.1-144.2 | Oxide | Comp2 | 0.423 | 0.334 | 95.33 | 0.97 | 1.63 |
NSM-00051 | 389.0-399.7 | Oxide | Comp3 | 0.524 | 0.566 | 90.18 | 0.76 | 1.09 |
NSM-00051 | 399.7-441.0 | Oxide | Comp4 | 0.049 | 0.057 | 77.81 | 1.14 | 0.98 |
NSM-00069 | 118.7-131.1 | Oxide | Comp5 | 1.217 | 1.049 | 97.85 | 0.64 | 1.25 |
NSM-00076 | 110.8-120.0 | Oxide | Comp6 | 0.081 | 0.052 | 94.5 | 0.8 | 1.14 |
NSM-00102 | 41.9-68.0 | Oxide | Comp7 | 0.01 | 0.009 | 78.51 | 0.55 | 0.9 |
NSM-00102 | 68.0-95.8 | Oxide | Camp8 | 0.036 | 0.047 | 88.5 | 1.08 | 1.36 |
NSM-00102 | 95.8-135.5 | Oxide | Comp9 | 0.008 | 0.01 | 27.37 | 1.05 | 0.98 |
NSM-00104 | 22.4-38.6 | Oxide | Comp 10 | 0.251 | 0.242 | 94.8 | 1.12 | 0.86 |
NSM-00105 | 0-26.2 | Oxide | Comp 11 | 0.06 | 0.066 | 93.32 | 0.81 | 1.34 |
NSM-00105 | 50.2-81.5 | Oxide | Comp 12 | 0.008 | 0.008 | 69.24 | 0.84 | 0.77 |
NSM-00106 | 73.0-100.6 | Oxide | Comp 13 | 0.009 | 0.011 | 80.55 | 1.15 | 0.58 |
NSM-00106 | 116.2-153.0 | Oxide | Comp 14 | 0.212 | 0.265 | 97.15 | 0.85 | 1.74 |
NSM-00106 | 153.0-183.0 | Oxide | Comp 15 | 0.012 | 0.019 | 79.27 | 1.19 | 0.48 |
NSM-00111 | 141.0-143.0, 145.4-161.0 | Oxide | Comp16 | 0.01 | 0.01 | 68.49 | 1.01 | 1.54 |
NSM-00111 | 163.3-196.7 | Oxide | Comp 17 | 0.013 | 0.012 | 74.69 | 0.78 | 1.04 |
NSM-00111 | 201.7-290.0 | Oxide | Comp 18 | 0.015 | 0.Q16 | 70.2 | 0.76 | 1.62 |
NSM-00111 | 290.0-339.7, 343.7-351.9 | Oxide | Comp 19 | 0.013 | 0.011 | 79.12 | 1.24 | 1.61 |
NSM-00111 | 351.9-366.0 | Oxide | Comp 20 | 0.039 | 0.043 | 89.98 | 1.5 | 0.99 |
NSM-00111 | 366.0-384.8 | Oxide | Comp 21 | 0.026 | 52.46 | 1.58 | 1.47 | |
NSM-00111 | 384.8-391.8, 393.5-405.6, 409.0-412.4 | Oxide | Comp 22 | 0.01 | 69.96 | 1.57 | 0.88 | |
NSM-00112 | 6.0-22.4 | Oxide | Comp23 | 0.014 | 92.42 | 1.16 | 0.82 | |
NSM-00112 | 124.9-217.7 | Oxide | Comp 24 | 0.011 | 74.03 | 1.51 | 1.28 | |
NSM-00105 | 0·26.2 | Oxide | Column 5 | 0.072 | 95 | 0.5 | 1.68 | |
NSM-00123 | 29.3-161.1 | |||||||
NSM-00123 | 12.5·183.5 | |||||||
NSM-00136 | 40.9·49.1 | |||||||
NSM-00102 | 41.9-135.5 | Oxide | Column 6 | 0.018 | 95.7 | 0.49 | 1.13 | |
NSM-00106 | 153-183 | |||||||
NSM-111 | 141-161 | Oxide | Column 7 | 0.018 | 89.1 | 0.96 | 1.57 | |
NSM-111 | 201.7-384.4 | |||||||
NSM-112 | 6-22.4 | |||||||
NSM-117 | 25-33.2 | |||||||
NSM-117 | 48-55.5 | |||||||
NSM-105 | 50.2-81.5 | Oxide | Column8 | 0.013 | 85.2 | 0.64 | 1.76 | |
NSM-111 | 161-196.7 | |||||||
NSM-111 | 384.8-416 | |||||||
NSM-106 | 73-100.6 | Oxide | Column 9 | 0.012 | 98 | 0.8 | 1.85 | |
NSM-112 | 194.5-217.7 | |||||||
Average | 0.112 | 82.49 | 0.99 | 1.23 |
Cyanide and Lime consumptions were 0.99 lb/st and 1.23 lb/st, respectively.
Table 7. Summary of Newmont’s Silica Ridge preliminary Bottle Roll Leach Test sourced from Newmont’s historical files.
Further test work conducted by Newmont at Silica Ridge suggests gravity concentration provides an improvement to the extracted gold from 80.4% without gravity concentration to 85.5% with gravity concentration.
Newmont’s Historical Test Results
Silica Ridge - initial bottle roll results
Comp | 1.5inch Crush/Leach | 80% 200# Grind/Leach | 80% 200# Grind/Grav/ Leach |
1 | 43.22 | 93.54 | 95.14 |
2 | 14.47 | 95.33 | 96.7 |
3 | 12.77 | 90.18 | 97.65 |
4 | 13.91 | 77.81 | 92.87 |
5 | 3.72 | 97.85 | 99.67 |
6 | 78.12 | 94.5 | 96.34 |
7 | 51.09 | 78.51 | 91.24 |
8 | 62.87 | 88.5 | 91.93 |
9 | 71.3 | 27.37 | 62.51 |
10 | 72.22 | 94.8 | 95.11 |
11 | 45.67 | 93.32 | 95.58 |
12 | 60.1 | 69.24 | 83.5 |
13 | 77.72 | 80.55 | 89.76 |
14 | 56.03 | 97.15 | 98.4 |
15 | 60.55 | 79.27 | 93.9 |
16 | 54.83 | 68.49 | 79.54 |
17 | 66.24 | 74.69 | 79.68 |
18 | 55.69 | 70.2 | 48.95 |
19 | 70.59 | 79.12 | 88.93 |
20 | 83.72 | 89.98 | 85.18 |
21 | 40.95 | 52.46 | 69.06 |
22 | 74.5 | 69.96 | 61.98 |
23 | 80.47 | 92.42 | 92.68 |
24 | 58.72 | 74.03 | 54.99 |
Average | 54.56 | 80.39 | 85.05 |
Table 8. Summary of Newmont’s Silica Ridge preliminary Bottle Roll Leach Test including grinding, gravity and leach test work sourced from Newmont’s historical files.
North Hill, Silica Ridge and Southeast Pediment – Kennecott’s Historical Test Results
Kennecott contracted McClelland Laboratories Inc. to conduct agitated Leach Bottle Roll Test work on four drill sample composites of reverse circulation drill-hole samples from Silica Ridge and North Hill. The results yielded 80% and 82.5% extracted gold from two drill holes SM-1 and SM-2 at North Hill. For Silica Ridge the results yielded 80.9% and 54.9% extracted gold. For Southeast Pediment the results yielded 84.3% and 82.8% extracted gold. The results were conducted in 1987 for North Hill and Silica Ridge and materials comprised 2kg split composites of -1/4 inch (0.635cm) size which were bottled rolled for 96 hours. The results for Southeast pediment were conducted in 1989 and sourced from two drill holes SM-134 and SM-135 comprising 3kg split samples.
Kennecott’s historical results are summarised in the table below.
Kennecott’s Historical Test Results
North Hill, Silica Ridge and Southeast Pediment
Test Date | Deposit | Composite | Head Assay* | Calculated Head Assay | Extraction (%) | ||||
Hole ID | Interval | oz Au/ton | oz Ag/ton | oz Au/ton | oz Ag/ton | Au | Ag | ||
1987 | North Hill | SM-1 | 0.034 | 0.21 | 0.035 | 0.07 | 80.0 | 28.6 | |
SM-2 | 0.072 | 0.41 | 0.08 | 0.1 | 82.5 | 40.0 | |||
Silica Ridge | SN012 | 0.166 | 0.81 | 0.178 | 0.94 | 80.9 | 26.6 | ||
SM-15 | 0.085 | 1.3 | 0.082 | 1.11 | 54.9 | 5.4 | |||
1989 | Southeast Pediment | SM-134 | 75-135ft | 0.071 | 0.57 | 0.07 | 0.52 | 84.3 | 15.4 |
SM-135 | 120-135ft | 5.128 | 2.9 | 3.477 | 2.24 | 82.8 | 61.2 | ||
* Conventional fire assay fusion: assayed in triplicate (McClelland 1987; 1989) |
Table 9. Bottle Roll Agitated Leach Test work by McClelland laboratory for Kennecott in 1987 and 1989.
KCA completed bottle roll, column leach and gravity test work on surface and trench samples from Southeast Pediment and Silica Ridge in 1996 and 1997. Summaries of these results are provided below.
Southeast Pediment Test results
Date | Test | Composite | Depth ft | Type | Head Assay (oz Au/ton) | Size | Time (days) | Au Extraction% | |
Average | Calculated | ||||||||
1996 | Bottle Roll | SEP-96-7 | 95-105 | RC chips | 0.059 | 0.090 | 100# | 3 | 98.9 |
Bottle Roll | SEP-96-7 | 95-105 | RC chips | 0.059 | 0.074 | As rec'd | 6 | 85.1 | |
Bottle Roll | SEP-96-10 | 50-60 | RC chips | 5.192 | 5.098 | 100# | 3 | 99.7 | |
SEP-96-42 | 90-100 | ||||||||
Bottle Roll | SEP-96-10 | 50-60 | RC chips | 5.192 | 8.349 | As rec'd | 6 | 27.4 | |
SEP-96-42 | 90-100 | ||||||||
Bottle Roll | SEP-96-21 | 80-85 | RC chips | 0.728 | 0.700 | 100# | 3 | 99.6 | |
SEP-96-40 | 55-60 | ||||||||
Bottle Roll | SEP-96-21 | 80-85 | RC chips | 0.728 | 0.688 | As rec'd | 6 | 78.6 | |
SEP-96-40 | 55-60 | ||||||||
Bottle Roll | SEP-96-23 | 80-85 | RC chips | 0.025 | 0.023 | 100# | 3 | 91.3 | |
Bottle Roll | SEP-96-23 | 80-85 | RC chips | 0.025 | 0.021 | As rec'd | 6 | 95.2 | |
Bottle Roll | SEP-96-42 | 135-155 | RC chips | 0.04 | 0.028 | 100# | 3 | 96.4 | |
Bottle Roll | SEP-96-42 | 135-155 | RC chips | 0.04 | 0.033 | As rec'd | 6 | 84.8 | |
Bottle Roll | SEP-96-55 | 190-195 | RC chips | 0.022 | 0.027 | 100# | 3 | 96.3 | |
Bottle Roll | SEP-96-55 | 190-195 | RC chips | 0.022 | 0.024 | As rec'd | 6 | 91.7 | |
1997 | Bottle Roll | SEP T-4 | 20-25 | Trench | 0.017 | 0.02 | 100# | 2 | 85.0 |
Bottle Roll | SEP T-4 | 75-80 | Trench | 0.052 | 0.059 | 100# | 2 | 84.7 | |
Bottle Roll | SEP T-4 | 75-80 | Trench | 0.052 | 0.058 | 1 inch | 8 | 72.4 | |
Bottle Roll | SEP T-5 | 34-40 | Trench | 0.017 | 0.018 | 100# | 2 | 88.9 | |
Bottle Roll | SEP T-5 | 55-60 | Trench | 0.029 | 0.031 | 100# | 2 | 93.5 | |
Bottle Roll | SEP T-6 | 75-80 | Trench | 0.028 | 0.036 | 100# | 2 | 97.2 | |
Bottle Roll | SEP T-6 | 75-80 | Trench | 0.58 | 0.606 | 1 inch | 8 | 76.2 | |
Bottle Roll | Bulk composite | Trench | 0.171 | - | 100# | 6 | 98.9 | ||
Column | Bulk composite | Trench | 0.171 | 0.160 | 0.25 inch | 111 | 92.5 | ||
Column | Bulk composite | Trench | 0.171 | 0.159 | 0.5 inch | 111 | 89.9 | ||
Column | Bulk composite | Trench | 0.171 | 0.164 | 1 inch | 111 | 87.8 | ||
Gravity Table | SEP T-4 | 75-80 | Trench | 0.036 | 28# | 14.2 | |||
Gravity Table | SEP-96-51 | 85-90 | RC chips | 1.642 | 28# | 37.3 | |||
Gravity Table | SEP T-6 | 75-80 | Trench | 0.559 | 28# | 38.9 |
Table 10. Southeast pediment Bottle Roll Test work completed by KCA laboratory in 1986 and 1997. Materials were sourced from reverse circulation drill chips and surface trench samples.
Methodology for the above KCA analysis conducted for the Southeast Pediment deposit is summarised below.
KCA testing of Silica Ridge Samples
Date | Test | Composite | Type | Head Assay (oz Au/ton) | Size | Time (days) | Au Extraction % | |
Average* | Calculated | |||||||
1997 | Bottle Roll | T-8 Met 1&2 | Trench | 0.058 | 0.06 | 100# | 2 | 95.0 |
Bottle Roll | T-8 Met 1&2 | Trench | 0.058 | 0.063 | 0.25 inch | 7 | 68.3 | |
Bottle Roll | T-8 Met 1&2 | Trench | 0.058 | 0.072 | 1 inch | 7 | 56.9 | |
1997b | Bottle Roll | Composite | RC chips | 0.041 | 0.05 | As rec'd | 8 | 70.0 |
Bottle Roll | T-4 (310-320ft) | Trench | 0.056 | 0.064 | 1 inch | 8 | 51.6 | |
1997 | Column | T-8 Met 1&2 | Trench | 0.058 | 0.072 | 0.25 inch | 85 | 86.1 |
Column | T-8 Met 1&2 | Trench | 0.058 | 0.065 | 0.5 inch | 85 | 78.5 | |
Column | T-8 Met 1&2 | Trench | 0.058 | 0.074 | 1 inch | 85 | 77.0 | |
* Average of two 30g gire assays by two independent commercial laboratories (KCA 1997a: 1997b) |
Table 11. Silica Ridge Bottle Roll Test work by KCA laboratory in 1997. Materials were sourced mostly from surface trench samples and a single sample from reverse circulation drill chips.
Methodology for the above KCA analysis conducted for the Silica Ridge deposit is summarised below.
Historical Bulk Sampling from Southeast Pediment
In 2002 eight trenches and a test pit were dug comprising 1,067t of high-grade mineralisation which was processed at the Newmont Twin Creeks Juniper mill. The bulk sample had a calculated grade of 0.224 ounce per ton and 0.913 ounce per ton of silver and recovery of the gold was reported as 95.2% and silver 79.5%.
Western States Minerals Corporation also sent a bulk sample from Southeast Pediment to Gekko Systems for gravity concentration testing which achieved 27.5% gold and 24% silver. Intense cyanidation of the gravity concentrate extracted >97% gold in the concentrate in 12 hours and >99% gold in the concentrate in 24 hours.
Further study is required to incorporate a gravity concentration circuit in conjunction with a cyanide leaching over longer timeframes.
About Sandman
In December 2020, Gold Bull purchased the Sandman Project from Newmont. Gold mineralization was first discovered at Sandman in 1987 by Kennecott and the project has been intermittently explored since then. There are four known pit constrained gold resources located within the Sandman Project, consisting of 21.8Mt @ 0.7g/t gold for 494,000 ounces of gold; comprising of an Indicated Resource of 18,550kt @ 0.73g/t gold for 433kozs of gold plus an Inferred Resource of 3,246kt @ 0.58g/t gold for 61kozs of gold. Several of the resources remain open in multiple directions and the bulk of the historical drilling has been conducted to a depth of less than 100m. Sandman is conveniently located circa 25-30 km northwest of the mining town of Winnemucca, Nevada.
Qualified Person
Cherie Leeden, B.Sc Applied Geology (Honours), MAIG, a “Qualified Person” as defined by National Instrument 43-101, has read and approved all technical and scientific information contained in this news release. Ms. Leeden is the Company’s Chief Executive Officer. Cherie Leeden relied on resource information contained within the Technical Report on the Sandman Gold Project, prepared by Steven Olsen, a Qualified Person under NI 43-101, who is a Qualified Persons as defined by the National Instrument NI 43-101. Mr. Olsen is an independent consultant and has no affiliations with Gold Bull except that of an independent consultant/client relationship. Mr. Olsen is a member of the Australian Institute of Geoscientists (AIG) and is the Qualified Person under NI 43-101, Standards of Disclosure for Mineral Projects.
About Gold Bull Resources Corp.
Gold Bull’s mission is to grow into a US focused mid-tier gold development Company via rapidly discovering and acquiring additional ounces. The company’s exploration hub is based in Nevada, USA, a top-tier mineral district that contains significant historical production, existing mining infrastructure and an established mining culture. Gold Bull is led by a Board and Management team with a track record of exploration and acquisition success.
Gold Bull’s core asset is the Sandman Project, located in Nevada which has a 494,000 oz gold resource as per 2021 43-101 Resource Estimate. Sandman is located 23 km south of the Sleeper Mine and boasts excellent large-scale exploration potential.
Gold Bull is driven by its core values and purpose which includes a commitment to safety, communication & transparency, environmental responsibility, community, and integrity.
Cherie Leeden
President and CEO, Gold Bull Resources Corp.
For further information regarding Gold Bull Resources Corp., please visit our website at www.goldbull.ca or email [email protected].
Cautionary Note Regarding Forward-Looking Statements
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
This news release contains certain statements that may be deemed “forward-looking statements” with respect to the Company within the meaning of applicable securities laws. Forward-looking statements are statements that are not historical facts and are generally, but not always, identified by the words “expects”, “plans”, “anticipates”, “believes”, “intends”, “estimates”, “projects”, “potential”, “indicates”, “opportunity”, “possible” and similar expressions, or that events or conditions “will”, “would”, “may”, “could” or “should” occur. Although Gold Bull believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance, are subject to risks and uncertainties, and actual results or realities may differ materially from those in the forward-looking statements. Such material risks and uncertainties include, but are not limited to, the Company’s ability to raise sufficient capital to fund its obligations under its property agreements going forward, to maintain its mineral tenures and concessions in good standing, to explore and develop its projects, to repay its debt and for general working capital purposes; changes in economic conditions or financial markets; the inherent hazards associates with mineral exploration and mining operations, future prices of copper and other metals, changes in general economic conditions, accuracy of mineral resource and reserve estimates, the potential for new discoveries, the ability of the Company to obtain the necessary permits and consents required to explore, drill and develop the projects and if obtained, to obtain such permits and consents in a timely fashion relative to the Company’s plans and business objectives for the projects; the general ability of the Company to monetize its mineral resources; and changes in environmental and other laws or regulations that could have an impact on the Company’s operations, compliance with environmental laws and regulations, dependence on key management personnel and general competition in the mining industry. Forward-looking statements are based on the reasonable beliefs, estimates and opinions of the Company’s management on the date the statements are made. Except as required by law, the Company undertakes no obligation to update these forward-looking statements in the event that management’s beliefs, estimates or opinions, or other factors, should change.