Ad blocking detected

Thank you for visiting CanadianInsider.com. We have detected you cannot see ads being served on our site due to blocking. Unfortunately, due to the high cost of data, we cannot serve the requested page without the accompanied ads.

If you have installed ad-blocking software, please disable it (sometimes a complete uninstall is necessary). Private browsing Firefox users should be able to disable tracking protection while visiting our website. Visit Mozilla support for more information. If you do not believe you have any ad-blocking software on your browser, you may want to try another browser, computer or internet service provider. Alternatively, you may consider the following if you want an ad-free experience.

Canadian Insider Ultra Club
$432/ year*
Daily Morning INK newsletter
+3 months archive
Canadian Market INK weekly newsletter
+3 months archive
30 publication downloads per month from the PDF store
Top 20 Gold, Top 30 Energy, Top 40 Stock downloads from the PDF store
All benefits of basic registration
No 3rd party display ads
JOIN THE CLUB

* Price is subject to applicable taxes.

Paid subscriptions and memberships are auto-renewing unless cancelled (easily done via the Account Settings Membership Status page after logging in). Once cancelled, a subscription or membership will terminate at the end of the current term.

Cardinal Extends Ndongo East Discovery Strike Length

TORONTO, Aug. 29, 2018 (GLOBE NEWSWIRE) -- Cardinal Resources Limited (ASX/TSX: CDV) (“Cardinal” or “the Company”) is pleased to announce further shallow gold intersections to the exploration drill results previously announced on 16 July 2018 from its new Ndongo East discovery on the Ndongo License.   The Ndongo East prospect is located approximately 20km north of the Company’s Namdini Gold Project which has a 6.5Moz Indicated Mineral Resource.

Highlights

  • Significant gold intersections include:
    2m @ 27.0 g/t Au from 10m in NDRC247
    • 6m @ 12.6 g/t Au from 2m in NDRC275
    • 7m @ 2.2 g/t Au from 55m in NDRC276

  • Shallow RC drilling has encountered multiple intercepts of near-surface gold mineralisation over a strike length of approximately 1.2km

  • Prospectivity of Ndongo East enhanced by proximity to historic Nangodi Gold Mine on regional Nangodi Shear Zone

Cardinal’s Chief Executive Officer / Managing Director, Archie Koimtsidis stated:

“These latest shallow, significant gold intersections have provided a possible threefold extension to the original 400m strike length discovery zone to 1.2km in length.

“The Ndongo East prospect lies within a larger target area of approximately 7km in strike length which has yet to be RC drill tested.   

We are increasingly encouraged at how Ndongo East is evolving with the potential to add high-grade gold ounces to our 6.5Moz Namdini Gold Project located only 20km to the south and we expect the recommencement of the drilling as soon as possible after the wet season ends during October-November 2018”.

To view Figure 1: Cardinal’s Bolgatanga Project (Ndongo, Bongo, Kungongo) and the NamdiniProject, visit http://www.globenewswire.com/NewsRoom/AttachmentNg/c3cd0135-58bc-4102-99c2-ed8768980712 

To view Figure 2: Ndongo Prospecting License with Exploration Prospects, visit 
http://www.globenewswire.com/NewsRoom/AttachmentNg/e0fefbe1-e429-4e5f-92ce-f2cfad19fae9 

Ndongo Prospecting License

The Ndongo Prospecting License covers an area of 295km2, having been expanded by the purchase of two exploration license areas from Kinross Gold in August 2017 (Figure 1).

The license area is considered highly prospective for the discovery of economic gold mineralisation associated with the prolific Nangodi Shear Zone, a splay fault off the main regional-scale Bole-Bolgatanga Shear.  The Nangodi Shear Zone is spatially related to no fewer than four significant gold discoveries, including the Company’s Namdini Gold Project with 6.5Moz Indicated Mineral Resource, the Shaanxi Gold Mine, the historic Nangodi Gold Mine and the Youga Gold Mine in Burkina Faso, adjacent to the Ghana border.  In addition, there are numerous historic shallow artisanal workings along many parts of this shear zone including the Dusi, Zug and McGuiness Prospects which all fall within Cardinal’s license area (Figure 2).

Ndongo East Prospect

The Ndongo East Prospect is located within NE-SW trending Birimian metavolcanics and metasediments.

Previously announced drilling intersected higher-grade gold mineralised structures concentrated in the northern portion of the shear zone over a 400m strike length on coincident gold-in-soil and geophysical targets (refer to Cardinal’s ASX/TSX announcement 16 July 2018 “Cardinal Makes New Gold Discovery at Ndongo”).

Cardinal’s most recent RC drilling along fence lines to test mineralisation further to the southwest along strike and at depth has proven encouraging as further significant intercepts within the mineralised structures suggest mineralisation continues.  The furthest drill fence to the southwest intercepted a narrow zone of mineralisation of 2m grading 27.0 g/t Au from 10m downhole in NDRC247 which indicates a strike potential of up to 1.2km of mineralised structures (Figure 3 and 5). Further infill drilling is planned to test this extended zone.

Drill Section E - E¹ is typical of the intersections encountered during the RC drilling, with gold mineralisation developed at, or near, the diorite-granodiorite contacts where competency differences create brittle fracturing which allows the ingress and precipitation of mineralising fluids (Figure 4).  The mineralised horizons contain variable chlorite-silica-carbonate-sericite alteration with sulphides (mainly pyrite with very minor arsenopyrite).

The mineralised system is open along a northwest-southeast strike and at depth with multiple mineralised intersections (Figure 5 and Table 2).

We expect to recommence drilling after the wet season during October-November 2018 in order to test the strike and depth extents of the mineralised system.

To view Figure 3: Ndongo East Prospect with RC Drill Locations and Interpreted Geology, visit http://www.globenewswire.com/NewsRoom/AttachmentNg/607f1db8-ee1c-4013-993e-5a91c36269db

To view Figure 4: Ndongo East Prospect Typical Section, visit 
http://www.globenewswire.com/NewsRoom/AttachmentNg/3ebbe2ea-e1d6-4634-9730-967e846f176f

To view Figure 5: The analytic signal image of ground magnetic data showing North East-South West mineralised structures open along strike, visit 
http://www.globenewswire.com/NewsRoom/AttachmentNg/6555d998-f0c2-4838-a801-a179c22f66ac 

ABOUT CARDINAL

Cardinal Resources Limited (ASX/TSX: CDV) is a gold-focused exploration and development Company which holds interests in tenements within Ghana, West Africa. 

The Company’s Namdini Project has an Indicated Mineral Resource of 6.5Moz of gold contained in 180Mt at 1.1 g/t Au at a cut-off of 0.5 g/t Au and an Inferred Mineral Resource of 0.5Moz of gold contained in 13Mt @ 1.2 g/t Au at a cut-off of 0.5g/t Au.

The Company is focused on the development of the Namdini Project through advancing its PFS studies as well as gold exploration on its tenements located within close proximity to the Namdini Project.

For further information contact:

Archie Koimtsidis       Alec Rowlands
CEO / MD      IR / Corp Dev
Cardinal Resources Limited       Cardinal Resources Limited 
P: +61 8 6558 0573      P: +1 647 256 1922

Bettina Filippone
Renmark Financial Communications Inc
E: [email protected]
P: +1 416 644 2020 or +1 514 939 3989

Competent Person’s / Qualified Person’s Statement

The information in this press release is based on information prepared by Mr. Paul Abbott, a full-time employee of Cardinal Resources, who is a member of the Geological Society of South Africa. Mr. Abbott has sufficient experience which is relevant to the style of mineralisation and type of deposit under consideration and the activity which he is undertaking to qualify as a Competent Person, as defined in the 2012 Edition of the “Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves”.

The information in this press release has been reviewed by Mr. Richard Bray, a Registered Professional Geologist with the Australian Institute of Geoscientists and Mr. Ekow Taylor, a Chartered Professional Geologist with the Australasian Institute of Mining and Metallurgy.  Mr. Bray and Mr. Taylor have more than five years’ experience relevant to the styles of mineralisation and type of deposits under consideration and to the activity which is being undertaken to qualify as a Competent Person, as defined in the 2012 Edition of the “Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves” and as a Qualified Person as defined by the NI43-101 instrument.  Mr. Bray and Mr. Taylor are full-time employees of Cardinal and hold equity securities in the Company.  Mr. Bray and Mr. Taylor have consented to the inclusion of the matters in this report based on the information in the form and context in which it appears.

Disclaimer

This ASX / TSX press release has been prepared by Cardinal Resources Limited (ABN: 56 147 325 620) (“Cardinal” or “the Company”).  Neither the ASX or the TSX, nor their regulation service providers accept responsibility for the adequacy or accuracy of this press release.

This press release contains summary information about Cardinal, its subsidiaries and their activities, which is current as at the date of this press release.  The information in this press release is of a general nature and does not purport to be complete nor does it contain all the information, which a prospective investor may require in evaluating a possible investment in Cardinal.

By its very nature exploration for minerals is a high‐risk business and is not suitable for certain investors.  Cardinal’s securities are speculative.  Potential investors should consult their stockbroker or financial advisor.  There are a number of risks, both specific to Cardinal and of a general nature which may affect the future operating and financial performance of Cardinal and the value of an investment in Cardinal including but not limited to economic conditions, stock market fluctuations, gold price movements, regional infrastructure constraints, timing of approvals from relevant authorities, regulatory risks, operational risks and reliance on key personnel and foreign currency fluctuations.

Except for statutory liability which cannot be excluded and subject to applicable law, each of Cardinal’s officers, employees and advisors expressly disclaim any responsibility for the accuracy or completeness of the material contained in this press release and excludes all liability whatsoever (including in negligence) for any loss or damage which may be suffered by any person as a consequence of any information in this Announcement or any error or omission here from. Except as required by applicable law, the Company is under no obligation to update any person regarding any inaccuracy, omission or change in information in this press release or any other information made available to a person nor any obligation to furnish the person with any further information.  Recipients of this press release should make their own independent assessment and determination as to the Company’s prospects, its business, assets and liabilities as well as the matters covered in this press release.

Forward‐looking statements

Certain statements contained in this press release, including information as to the future financial or operating performance of Cardinal and its projects may also include statements which are ‘forward‐looking statements’ that may include, amongst other things, statements regarding targets, anticipated timing of the PEA on the Namdini project, estimates and assumptions in respect of mineral resources and anticipated grades and recovery rates, production and prices, recovery costs and results, capital expenditures and are or may be based on assumptions and estimates related to future technical, economic, market, political, social and other conditions. These ‘forward – looking statements’ are necessarily based upon a number of estimates and assumptions that, while considered reasonable by Cardinal, are inherently subject to significant technical, business, economic, competitive, political and social uncertainties and contingencies and involve known and unknown risks and uncertainties that could cause actual events or results to differ materially from estimated or anticipated events or results reflected in such forward‐looking statements.

Cardinal disclaims any intent or obligation to update publicly or release any revisions to any forward‐looking statements, whether as a result of new information, future events, circumstances or results or otherwise after today’s date or to reflect the occurrence of unanticipated events, other than required by the Corporations Act and ASX and TSX Listing Rules. The words ‘believe’, ‘expect’, ‘anticipate’, ‘indicate’, ‘contemplate’, ‘target’, ‘plan’, ‘intends’, ‘continue’, ‘budget’, ‘estimate’, ‘may’, ‘will’, ‘schedule’ and similar expressions identify forward‐looking statements.

All forward‐looking statements made in this press release are qualified by the foregoing cautionary statements. Investors are cautioned that forward‐looking statements are not guarantees of future performance and accordingly investors are cautioned not to put undue reliance on forward‐looking statements due to the inherent uncertainty therein.

SCHEDULE 1
NDONGO LICENSE AREA DRILL RESULTS
        
Hole IDDepth (m)Dip (°)Azimuth (°)Grid IDmEastmNorthmRL
NDRC216120-60122WGS84_30N758,2151,201,926219
NDRC217120-60120WGS84_30N758,2201,201,962220
NDRC218130-60115WGS84_30N758,2471,202,008219
NDRC222125-60120WGS84_30N758,2661,202,057220
NDRC223125-60115WGS84_30N758,2341,201,988219
NDRC224120-60120WGS84_30N758,3171,201,982218
NDRC226120-60120WGS84_30N758,3991,201,925217
NDRC228126-60115WGS84_30N758,3531,201,950218
NDRC230130-60120WGS84_30N758,2041,202,026220
NDRC231120-60115WGS84_30N758,2161,201,548217
NDRC235196-60115WGS84_30N758,1271,201,609219
NDRC236120-60115WGS84_30N758,0841,201,632220
NDRC237150-60115WGS84_30N758,0441,201,661221
NDRC238120-60115WGS84_30N757,9991,201,689222
NDRC241126-60115WGS84_30N758,1671,201,826220
NDRC242120-60115WGS84_30N758,1271,201,847221
NDRC243137-60115WGS84_30N757,7981,200,881220
NDRC24471-60115WGS84_30N757,7501,200,905220
NDRC247124-60115WGS84_30N757,8431,200,856219
NDRC248120-60115WGS84_30N758,1731,201,949220
NDRC250120-60112WGS84_30N757,9681,201,241221
NDRC251141-60115WGS84_30N757,9231,201,273221
NDRC26278-60115WGS84_30N758,1811,201,918220
NDRC26497-60112WGS84_30N758,1831,201,986220
NDRC265120-60115WGS84_30N758,1311,201,944221
NDRC26678-60115WGS84_30N758,1801,201,875220
NDRC26791-60112WGS84_30N758,1391,201,906221
NDRC269126-60115WGS84_30N758,3451,202,419217
NDRC270100-60112WGS84_30N758,3011,202,448216
NDRC271105-60115WGS84_30N758,2621,202,472217
NDRC273102-60115WGS84_30N758,2161,202,496217
NDRC275120-60115WGS84_30N758,1591,201,797220
NDRC276120-60115WGS84_30N758,1081,201,826221
NDRC27789-60115WGS84_30N758,0611,201,791222
NDRC278100-60115WGS84_30N758,0351,201,740222
NDRC279100-60115WGS84_30N758,1031,201,765221
NDRC28090-60115WGS84_30N758,0201,201,666222
NDRC28190-60115WGS84_30N758,0301,201,637221
NDRC28280-60115WGS84_30N757,9831,201,462221
NDRC283110-60115WGS84_30N758,1371,202,084221
NDRC284120-60115WGS84_30N758,0931,202,110221
NDRC285120-60115WGS84_30N758,0501,202,134221
NDRC286120-60115WGS84_30N758,0081,202,158222
NDRC28784-60115WGS84_30N757,9641,202,183222
NDRC28884-60115WGS84_30N757,9201,202,212222
NDRC28984-60115WGS84_30N757,8791,202,236222
NDRC290109-60115WGS84_30N758,3811,201,345213
NDRC291109-60115WGS84_30N758,2931,201,391214
NDRC292115-60112WGS84_30N758,3381,201,364213
NDRC293115-60115WGS84_30N758,2471,201,422215
NDRC294112-60112WGS84_30N758,2141,201,440216
NDRC295112-60115WGS84_30N758,1651,201,472217
NDRC296110-60108WGS84_30N758,1191,201,494219
NDRC297110-60108WGS84_30N758,0791,201,525219
NDRC298110-60115WGS84_30N758,0361,201,550220
NDRC299114-60112WGS84_30N757,9951,201,577220
NDRC300121-60112WGS84_30N757,9501,201,600222
NDRC301100-60112WGS84_30N758,0731,201,717221
NDRC30264-60112WGS84_30N758,0331,201,256220
NDRC303100-60112WGS84_30N757,9901,201,281220
NDRC304100-60115WGS84_30N757,8741,201,288222
NDRC305121-60115WGS84_30N757,8981,201,061221
NDRC306120-60112WGS84_30N757,8341,201,314223
NDRC30796-60112WGS84_30N757,9561,201,046219
NDRC308120-60112WGS84_30N758,2781,200,594213
NDRC309120-60115WGS84_30N758,2361,200,623213
 
Table 1: Meta-Data Listing of Drill Holes

 

Hole IDmFrommTomWidthAu g/t
NDRC2236930.8
NDRC223343841.2
NDRC223666711.2
NDRC2240110.9
NDRC226474810.8
NDRC228535411.5
NDRC228586020.8
NDRC228888910.7
NDRC23514514611.2
NDRC23515015111.3
NDRC236505110.8
NDRC2471012227
NDRC247878810.6
NDRC250686911.0
NDRC250979810.7
NDRC262444842.2
NDRC264555610.7
NDRC264717323.2
NDRC265838632.2
NDRC266293011.9
NDRC266676811.0
NDRC267212431.4
NDRC267687465.2
NDRC27528612.6
NDRC275293010.6
NDRC275555940.9
NDRC275959611.0
NDRC276556272.2
NDRC279262710.5
NDRC2814959101.6
NDRC281808110.8
NDRC282616320.8
NDRC284434410.7
NDRC295181910.6
NDRC295212211.2
NDRC295252610.7
NDRC296757610.8
NDRC298434410.9
NDRC301384241.0
NDRC301767712.6
NDRC3025832.9
NDRC302343510.6
Table 2:  Summary of Individual Intercepts

Notes:

  • Samples analyzed for Au (SGS Lab FAA505 method) which is a 50g fire assay fusion with AAS instrument finish.
  • Grid coordinates are in WGS84 Zone 30 North.   
APPENDIX 1
JORC CODE 2012 EDITION 
TABLE 1 REPORTING OF EXPLORATION RESULTS
 
 Section 1 – Sampling Technique and Data
CriteriaJORC Code ExplanationCommentary
Sampling techniquesNature and quality of sampling (e.g. cut channels, random chips, or specific specialised industry standard measurement tools appropriate to the minerals under investigation, such as down hole gamma sondes, or handheld XRF instruments, etc.). These examples should not be taken as limiting the broad meaning of sampling.Reverse Circulation (RC) drill samples are collected by using downhole sampling hammers with nominal 127 to 140mm diameters. Samples are collected through a cyclone and immediately weighed to determine recoveries; the entire sample is then split by a three-tier riffle splitter. Two samples (~2.5-3.0 kg) are collected, one for the lab, the other a duplicate stored at the Bolgatanga sample shed.
Include reference to measures taken to ensure sample representivity and the appropriate calibration of any measurement tools or systems used.Sampling is guided by Cardinal Resources protocols and Quality Control procedures as per industry standard.  

To ensure representative sampling, 1m RC samples are collected from a cyclone, passing them through a three-tier riffle splitter, and taking duplicate samples every 20th sample.
Aspects of the determination of mineralisation that are Material to the Public Report. 


In cases where ‘industry standard’ work has been done this would be relatively simple (e.g. ‘reverse circulation drilling was used to obtain 1 m samples from which 3 kg was pulverised to produce a 30 g charge for fire assay’). In other cases, more explanation may be required, such as where there is coarse gold that has inherent sampling problems. Unusual commodities or mineralisation types (e.g. submarine nodules) may warrant disclosure of detailed information.
The determination of mineralisation is based on observed alterations and lithological differences. 

RC samples are crushed through a RSD Boyd crusher to -2mm, then a <1kg split sample is pulverised via LM2 Ring Pulveriser to a nominal 85% passing -75µm. 

A 200 g sub-sample is taken from the pulverised material for analysis.  A 50 g charge weight is fused with litharge-based flux, cupelled and the prill dissolved in aqua regia. The gold tenor is then determined by AAS.
Drilling techniquesDrill type (e.g. core, reverse circulation, open‐hole hammer, rotary air blast, auger, Bangka, sonic, etc.) and details (e.g. core diameter, triple or standard tube, depth of diamond tails, face-sampling bit or other type, whether core is oriented and if so, by what method, etc.).Reverse circulation drilling uses sampling hammer of nominal 127 to 140mm diameter. 

Drill holes are inclined at -45⁰ to -60⁰ angles for optimal zone intersection.  All RC drill collars are surveyed using Trimble R8 RTK GPS with downhole surveying every 30m using Reflex digital surveying instruments.
Drill sample recoveryMethod of recording and assessing core and chip sample recoveries and results assessed.The method of recording RC chip sample data is to enter the relevant data onto a hand-held Motion F5te Tablet PC using a set of standard templates supplied by Maxwell Geoservices, Perth (Maxwell).  

Reverse circulation sampling is good.  RC chips are logged, weighed and captured to the database.  RC sample recoveries are assessed by weighing 1m samples from the cyclone on a scale in the field and comparing with the theoretical volume contained in a 1m x 140mm diameter hole to calculate an estimated percentage sample recovery. 
Measures taken to maximise sample recovery and ensure representative nature of the samples.At the reverse circulation rig, sampling systems are routinely cleaned to minimise the opportunity for contamination and drilling methods are focused on sample quality.  The measures taken to maximize RC sample recovery are through a cyclone and a 3-tier riffle splitter.  Each 1m sample is passed twice through the splitter before sampling to ensure maximum homogenisation of each sample and to collect an unbiased representative sample to be assayed.  

The reverse circulation rigs have auxiliary compressors and boosters to help maintain dry samples. Where wet samples are encountered, the reverse circulation drilling is discontinued.
Whether a relationship exists between sample recovery and grade and whether sample bias may have occurred due to preferential loss/gain of fine/coarse material.No relationship is seen to exist between RC sample recovery and grade, and no sample bias has occurred due to preferential loss/gain of any fine/coarse material due to the acceptable sample recoveries obtained by the drilling methods employed.
LoggingWhether core and chip samples have been geologically and geotechnically logged to a level of detail to support appropriate Mineral Resource estimation, mining studies and metallurgical studies.All RC drill samples are fully logged according to observed lithology and alteration directly to a digital format on a Field Toughbook laptop logging system following procedures and using Cardinal geologic codes.  Data is imported into Cardinal’s central database after validation in LogChief™.  

All RC chip geological logging is to a level of detail to support Mineral Resource estimation when required.
Whether logging is qualitative or quantitative in nature. Core (or costean, channel, etc.) photography.Logging is both quantitative and qualitative. 

RC chips in trays are photographed both in dry and wet form.
The total length and percentage of the relevant intersections logged.All RC holes are logged in full and to the total length of each drill hole. 
Sub- sampling techniques and sample preparationIf core, whether cut or sawn and whether quarter, half or all core taken.No core was drilled.
If non-core, whether riffled, tube sampled, rotary split, etc. and whether sampled wet or dry.RC samples are split using a three-tier riffle splitter. The majority of RC samples are dry. On occasions that wet samples are encountered, they are dried prior to splitting with a riffle splitter.
For all sample types, the nature, quality and appropriateness of the sample preparation technique.RC drill samples are sorted and dried in an oven for eight hours and weighed. They are then crushed to -2mm using a RSD Boyd crusher and a <1.0kg split is taken.  The reject sample is retained in the original bag and stored.  The split is pulverised in a LM2 to a nominal 85% passing 75µm and a 200g sub-sample is used for analysis. 

All preparation equipment is flushed with barren material prior to commencement of the job.
Quality control procedures adopted for all sub-sampling stages to maximise representivity of samples.Cardinal Resources has protocols that cover the sample preparation at the laboratories and the collection and assessment of data to ensure that accurate steps are used in producing representative samples for the analytical process. Key performance indices include:
  • Contamination index of 95% (that is at least 95% of blanks pass); failures can only be attributed to probable minor laboratory contamination.
  • Crushed Size index of 95% passing 2 mm (1:50 sample screened).
  • Grind Size index of 85% passing 75 microns (minimum 1:50 sample screened).
  • Check Samples returning at worst 20% precision at 90th percentile and bias of 5% or better.
Crusher and pulveriser are flushed with barren material at the start of every batch.
Measures taken to ensure that the sampling is representative of the in-situ material collected, including for instance results for field duplicate/second‐half sampling.RC sampling is carried out in accordance with Cardinal protocols as per industry best practice.  Quality control procedures adopted for all sub-sampling stages to maximize representativeness of samples is to insert commercial certified reference material (CRM) for standards and blanks every 20 samples.  

The Laboratory assays duplicate samples of each sample batch (20%) so that representation of the samples can be checked.  Field duplicates have been taken and analysis of results have shown the sampling to be representative. 

The measures described above are not applicable for Rock Chip sampling.
 
Whether sample sizes are appropriate to the grain size of the material being sampled.Measures taken to ensure that the RC sampling is representative of the in-situ material collected are to take field duplicate samples every 20th sample.  Approximately 3kg samples from the splitter are retained from each sample and stored at the company’s secured premises for possible re‐assay. 

Results of field duplicates, standards and blanks are all evaluated to ensure that the results of each assay batch are acceptable for the RC drill samples.
Quality of Assay data and laboratory testsThe nature, quality and appropriateness of the assaying and laboratory procedures used and whether the technique is considered partial or total.All samples are analysed for gold by lead collection fire assay of a 50 g charge with AAS finish; the assay charge is fused with the litharge-based flux, cupelled and prill dissolved in aqua regia and gold tenor determined by flame AAS. 

The analytical method is considered appropriate for the mineralisation style and is of industry standards.  The quality of the Fire Assaying and laboratory procedures are considered to be entirely appropriate for the rock samples submitted. 
For geophysical tools, spectrometers, handheld XRF instruments, etc., the parameters used in determining the analysis including instrument make and model, reading times, calibrations factors applied and their derivation, etc.No hand held geophysical tools are used.
Nature of quality control procedures adopted (e.g. standards, blanks, duplicates, external laboratory checks) and whether acceptable levels of accuracy (i.e. lack of bias) and precision have been established.Sample preparation checks for pulp fineness are carried out by the laboratory as part of their internal procedures to ensure the grind size of 85% passing 75µm is being attained.  Laboratories’ QAQC involves the use of internal lab standards using certified reference material (CRM) and blanks. 

Cardinal’s QAQC protocol is considered industry standard with CRMs submitted on a regular basis with routine samples.  The CRMs having a range of values and blanks are inserted in the ratio of 1:20. Duplicates are taken at the riffle splitter every 20th sample.  No duplicate samples are taken from core samples.  

Pulps are submitted to a secondary laboratory for checks on accuracy and precision of the primary laboratory.  Coarse rejects are submitted back to the primary laboratory to assess the adequacy of the sub-sampling process.
Verification of sampling and assayingThe verification of significant intersections by either independent or alternative company personnel.Significant intersections from RC samples have been verified by alternative company personnel.
The use of twinned holes.None of the drill holes in this report are twinned.
Documentation of primary data, data entry procedures, data verification, data storage (physical and electronic) protocols.Primary data are captured on field tough book laptops using LogChief™ Software. The software has validation routines and data is then imported onto a secure central database.
Discuss any adjustment to assay data.The primary data is always kept and is never replaced by adjusted or interpreted data.
Location of data
points
Accuracy and quality of surveys used to locate drill holes (collar and down‐hole surveys), trenches, mine workings and other locations used in Mineral Resource estimation. RC drill hole collar coordinates are surveyed using handheld Garmin GPSmap 62s GPS within ±3m accuracy. 

All drill collars are accurately surveyed using Trimble R8 RTK GPS system within ±10mm of accuracy (X, Y, Z).  

Coordinates are based on three control stations established at Namdini by Sahara Mining Services.

Downhole survey on RC drill holes is completed by using Reflex Ez-Shot survey instrument at regular 30 m intervals.
Specification of the grid system used.Coordinate and azimuth are reported in UTM WGS84 Zone 30 North.
Quality and adequacy of topographic control.Topographic control at Ndongo was supplied by Southern Geoscience Consultants (Perth) using satellite imagery.
Data spacing and distributionData spacing for reporting of Exploration Results.The RC drilling was carried out on variably spaced fence lines (30m to 775m apart) with hole spacing of 50m along lines testing mineralisation to a vertical depth of approximately 200m and covering a strike length of 1.25km
Whether the data spacing and distribution is sufficient to establish the degree of geological and grade continuity appropriate for the Mineral Resource and Ore Reserve estimation procedure(s) and classifications applied.Exploration is at the early stage, and as such drill data spacing and distribution are insufficient to establish geological and grade continuity that are appropriate for reporting Mineral Resources and Ore Reserves.
Orientation of data in relation to geological structureWhether sample compositing has been applied.No sample compositing has been applied.
Whether the orientation of sampling achieves unbiased sampling of possible structures and the extent to which this is known, considering the deposit type.RC drillholes are orientated to achieve intersection angles as close to perpendicular to the mineralisation as practicable based on ground magnetic modelling data. Some sampling bias may occur. 

Systematic geological mapping and diamond drilling are required to determine the true orientation of dips and structures of the mineralisation.
 
If the relationship between the drilling orientation and the orientation of key mineralised structures is considered to have introduced a sampling bias, this should be assessed and reported if material.
 
No significant orientation-based sampling bias is known at this time.
Sample securityThe measures taken to ensure sample security.An independent Ghanaian security contractor is used to ensure sample security.  

The field technicians and geologists ensure the rock chip samples are logged, prepared and stored under security until collected for delivery to the laboratories. 

At the time of sample collection, a sign-off process between Cardinal and the laboratory delivery truck driver ensures that samples and paperwork correspond. The samples are then transported to the laboratory where they are receipted against the dispatch documents.  The assay laboratories are responsible for the samples from the time of collection from Cardinal until final results are returned and checked by Cardinal Geologists. 

Sample pulps and coarse rejects are retained by the laboratories and are shipped back to Cardinal after final results are returned where they are stored under security.
Audits or reviewsThe results of any audits or reviews of sampling techniques and data.Sampling techniques are of industry standards. Data is audited by Maxwell Geoservices (Perth), who have not made any other recommendations.


Section 2 – Reporting of Exploration Results

(Criteria listed in section 1 will also apply to this section where relevant)

CriteriaJORC Code ExplanationCommentary
Mineral
Tenement and Land Status
Type, name/reference number, location and ownership including agreements or material issues with third parties including joint ventures, partnerships, overriding royalties, native title interests, historical sites, wilderness or national park and environmental settings.The Ndongo Exploration Permit is on PL9/22, PL9/13 and PL9/19 licenses over an area of 295 sq. km located in the North-East region of Ghana.
The security of the tenure held at the time of reporting along with any known impediments to obtaining a license to operate in the area.All tenements are current and in good standing.
Exploration Done by Other PartiesAcknowledgment and appraisal of exploration by other parties.Exploration in the region has been undertaken by a number of groups including:
  • 1933 - Colonial discovery of Gold at Nangodi.

  • 1934 to 1942 - Nangodi Mine production and other small development projects in the area (e.g. Zug, Pelungu, Money Palava).

  • 1992 to 1994 - BHP conducted regional exploration programmes including regional stream sediment and broad soil sampling to follow‐up on stream sediment anomalies. Project was abandoned when BHP withdrew from activity in West Africa.

  • 1996 to 1997 – Africwest was granted regional Reconnaissance License and undertook extensive soil sampling at Nangodi.

  • 2006 - Etruscan (JV with Red Back): Conducted data review and compilation, soil and rock sampling and RAB drilling. Identified blind mineralisation at Zupeliga.

  • 2011 - Abzu (JV with Red Back): Completed data compilation, RC/diamond drilling at Nangodi and Zoog.

  • 2012 - Abzu (JV with Red Back): Conducted trenching, rock sampling, ground geophysics survey (magnetic and EM) and geologic mapping. 
Geology

 
Deposit type, geological setting and style of mineralisationRC samples were collected within sheared and folded rocks containing sulphides; mainly pyrite with minor arsenopyrite.  

The geological setting is a Paleoproterozoic Greenstone Belt comprising Birimian metavolcanics, volcaniclastics and metasediments located along portion of the regional Bole-Bolgatanga Shear Zone and a splay off this Shear Zone (the Nangodi Shear Zone). 

The style of mineralisation is yet to be determined.
Drill hole informationA summary of all information material to the understanding of the exploration results including tabulation of the following information for all Material drill holes:
  • Easting and northing of the drill hole collar
  • Elevation or RL (Reduced Level – elevation above sea level in meters) of the drill hole collar
  • Dip and azimuth of the hole
  • Down hole length and interception depth
  • Hole length
A summary of drill hole information is provided in this document.
If the exclusion of this information is justified on the basis that the information is not Material and this exclusion does not detract from the understanding of the report, the Competent Person should clearly explain why this is the case.There has been no exclusion of information.
Data aggregation methodsIn reporting Exploration Results, weighting averaging techniques, maximum and/or minimum grade truncations (e.g. cutting of high grades) and cut‐off grades are usually Material and should be stated.No weighting averaging techniques nor cutting of high grades have yet been undertaken. 
Where aggregated intercepts incorporate short lengths of high grade results and longer lengths of low grade results, the procedure used for such aggregation should be stated and some typical examples of such aggregations should be shown in detail.Aggregated intercepts incorporating short lengths of high grade results within the lithological units are calculated to include no more than intervals of 3m below grades of <0.5 g/t Au when assay results are reported. 
The assumptions used for any reporting of metal equivalent values should be clearly stated.No metal equivalents are used in the intersection calculation.
Relationship between mineralisation widths and intercept lengthsThese relationships are particularly important in the reporting of exploration results.The relationship between mineralisation widths and intercept length from RC drilling are not yet known.
If the geometry of the mineralisation with respect to the drill hole angle is known, its nature should be reported.The geometry of the mineralisation with respect to the drill hole angles is not yet known.
If it is not known and only the down hole lengths are reported, there should be a clear statement to this effect (e.g. ‘down hole length, true width not known’).The geometry of the mineralisation is unknown; only downhole length is reported (no true width of mineralisation is reported).
DiagramsAppropriate maps and sections (with scales) and tabulations of intercepts should be included for any significant discovery being reported. These should include, but not be limited to a plane view of drill hole collar locations and appropriate sectional views.Appropriate locality map is included within the body of the accompanying document.
Balanced ReportingWhere comprehensive reporting of all Exploration Results is not practical, representative reporting of both low and high grades and/or widths should be practiced to avoid misleading reporting of Exploration Results.The accompanying document is considered to represent a balanced report.
Other
substantive exploration data
Other exploration data, if meaningful and material, should be reported including (but not limited to): geological observation; geophysical survey results; geochemical survey results; bulk samples – size and method of treatment; metallurgical test results; bulk density, groundwater, geotechnical and rock characteristics; potential deleterious or contaminating substances.Other exploration data collected is not considered material to this document at this stage.  

The interpretation of the geological observations shown in the cross sections are subject to possible change as new information is gathered. 

Further data collection will be reviewed and reported when considered material.
Further WorkThe nature and scale of planned further work (e.g. tests for lateral extensions or depth extensions or large – scale step – out drilling). 

Diagrams clearly highlighting the areas of possible extensions, including the main geological interpretations and future drilling areas, provided this information is not commercially sensitive.
Geological mapping, surface rock sampling, trenching, geophysical surveys and RC drilling are continuing. 

Further RC drilling is required along strike and at depth to further delineate this gold mineralised zone and to determine whether more sub-parallel mineralised horizons can be located. 

Comment On!

140
Upload limit is up to 1mb only
To post messages to your Socail Media account, you must first give authorization from the websites. Select the platform you wish to connect your account to CanadianInsider.com (via Easy Blurb).