2-Day Seminar: Aseptic Processing & Validation in the Manufacture of Biotech & Pharmaceutical Products (San Diego, CA, United States - March 18-19, 2019) - ResearchAndMarkets.com

The "2 Days Seminar: Aseptic Processing and Validation in the Manufacture of Biotech and Pharmaceutical Products" training has been added to ResearchAndMarkets.com's offering.

This course will provide an overview of the requirements for aseptic and bulk manufacturing operations, including facility design, contamination controls and acceptable personnel behaviors.

Cleanroom classifications and the techniques for proper cleaning and disinfection are presented, along with a high-level overview of microbiology in regards to cleanroom environmental monitoring and the associated impact to product and patient health and safety.

This course will also review the guidance provided in USP <1116> to ensure compliance with regulatory expectations are met.

Course Objectives

At the completion of this course, attendees will be able to:

• Explain the difference between Aseptic and Bulk processing
• Understand the facility and personnel requirements necessary to maintain microbial control
• Explain basic principles of microbiology and microorganism recovery in relation to cleanroom environmental monitoring (EM) and impact to product
• Understand the gowning requirements associated with different cleanroom classifications
• Explain basic principles of aseptic processing, including:
  • Cleanliness classifications
  • Process differences between aseptically produced and terminally sterilized product
  • Relation of manufacturing and handling procedures to sources of product contamination
  • The differences between cleaning, disinfection and sanitization
  • Proper cleaning/disinfectant technique
  • Elements of a robust environmental program and why EM is important
  • The role of isolator technology
• The purpose of media fills, and elements critical to their success
• Identify behaviors that are or are not appropriate when working in controlled areas, and why
• Identify ways that they can impact/improve site-specific EM and aseptic behavior issues

Areas Covered

• Topic 1: Basic Micro Review
• Topic 2: Review of Aseptic Processing Basics
• Topic 3: Review of Clean Area Behaviors
• Topic 4: Aseptic Validation

Learning Objectives

• Understand fundamental aseptic facility design principles
• Appreciate what the Food and Drug Administration (FDA) expects of an aseptic filling operation including key differences in other regulated markets
• Better understand aseptic container-closure systems and leak testing
• Know how to properly check equipment and systems in preparation for processing via process simulations - media fills
• Learn the difference between aseptic processing and terminal sterilization
• Learn about the importance of an environmental monitoring program
• Understand the technical fundamentals behind filter sterilization
• Begin to apply risk management strategies to aseptic operations
• Be in a better position to manage your clean room operations
• Appreciate the difference between isolators and barriers
• Know more about lesser-used techniques in aseptic processing
• Understand autoclave cycles and microbiological lethality
• Know about dry heat sterilization and depyrogenation
• Understand gamma and beta radiation sterilization
• Learn about ethylene oxide sterilization
• Know the basics of lyophilization - freeze drying
• Learn where cleaning validation fits in
• Learn about the various types of pharmaceutical water, including water for injection; pure steam generators
• Understand how validation concepts are inter-woven
• Receive practical tips on how to manage your aseptic operations

Agenda

DAY ONE (8:30 AM - 4:30 PM)

Topic 1: Basic Micro Review

• The role of environmental monitoring
• Types & sources of microorganisms
• The impact of microorganisms on product and patient health and safety

Topic 2: Review Aseptic Processing Basics

• Cleanliness classifications
• Process differences between aseptically produced and terminally sterilized product
• Relation of manufacturing and handling procedures to sources of product contamination
• The differences between and the purposes of cleaning, disinfection and sanitization
• Proper cleaning techniques
• The role of isolator technology

DAY TWO (08:30 AM to 04:00 PM)

Topic 3: Review Clean Area Behaviors

• Personnel gowning requirements
• Good clean area behaviors/practices
• Practices to avoid - and why
• Review site-specific EM/aseptic behavior observations/risks & ask attendees to brainstorm ways to change/improve/eliminate these behaviors & risks

Topic 4: Aseptic Validation

• The purpose of media fills, and elements critical to their success

For more information about this training visit https://www.researchandmarkets.com/research/dkgwx4/2day_seminar?w=4

View source version on businesswire.com: https://www.businesswire.com/news/home/20190215005364/en/

ResearchAndMarkets.com
Laura Wood, Senior Press Manager
[email protected]
For E.S.T Office Hours Call 1-917-300-0470
For U.S./CAN Toll Free Call 1-800-526-8630
For GMT Office Hours Call +353-1-416-8900
Related Topics: Pharmaceutical Manufacturing